SAGEMCOM F@ST 4310 User Manual

A- Annex A - Troubleshooting
F@ST 4310 Reference Manual Page A-3
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
A.2 Front panel LEDs
Note
When the router is switched on, the LED is green.
If no connection is made, the LED is off.
LED Status Meaning
Power
Off Power Off
Green Power On
Red Router in rescue mode
ADSL
Green steady ADSL Up
Green blinking
• ADSL Synchronisation in progress
or
• down
Internet
Off
• Power Off
or
• The Internet account must be configured
or
• Bridge mode
Green steady The Internet account is configured
Green blinking Tx/Rx traffic
Red Invalid or unauthorised Internet account
LAN x
(1 to 4)
Off No link detected on the Ethernet port
Green steady Ethernet port has detected a link with 100 Mbps device
Green blinking Tx/Rx traffic at 100 Mbps
WLAN
Off Wi-Fi deactivated
Green steady Wi-Fi activated
Green blinking Wi-Fi Tx/Rx
USB
Off No USB connection
Green steady USB connection available
Green blinking USB connection reading in progress
TV
Green steady IP TV Activated
Green blinking Playing IP TV

SAGEMCOM F@ST 4310 Specifications

General

Brand	SAGEMCOM
Model	F@ST 4310
Category	Network Router
Language	English