SAGEMCOM F@ST 4310 User Manual

5- Information / Configuration
Page 5-110 F@ST 4310 Reference Manual
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
5.8.4 Wireless Bridge
Object: This menu is used to configure wireless bridge features of the wireless LAN interface
• In the Wireless menu, select Wireless Bridge.
The following screen opens:
Field Action/Meaning
Default
value
AP Mode
Select:
• Wireless Bridge to set the CPE as a bridge in your
WDS network,
• Access Point enables access point functionality.
Access
Point
Bridge Restrict
Select one of the following options:
• Disabled to disable wireless bridge restriction.
Note: Any wireless bridge will be granted access.
• Enabled or Enabled(Scan) to enable wireless
bridge restriction.
Enabled
Remote Bridges
MAC Address
Enter the bridges MAC addresses which must be
granted access.
-

SAGEMCOM F@ST 4310 Specifications

General

Brand	SAGEMCOM
Model	F@ST 4310
Category	Network Router
Language	English