SAGEMCOM F@ST 4310 User Manual

4- Configuration of network parameters
F@ST 4310 Reference Manual Page 4-5
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
4.3 Data of the DHCP client
To obtain this data:
In Windows XP
1. Click on Start > Run, enter cmd and then click OK.
The command prompt screen appears.
2. Enter ipconfig /all (or ipconfig/all) then press Enter.

SAGEMCOM F@ST 4310 Specifications

General

Brand	SAGEMCOM
Model	F@ST 4310
Category	Network Router
Language	English