2- Description and connection of router
Page 2-8 F@ST 4310 Reference Manual
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
2.3.3 Connecting to your computer
Two kinds of connection can be made:
• Connection of the Ethernet interface of your router to your computer.
• Connection of the WLAN (Wi-Fi) interface to your computer.
2.3.3.1 Connecting the Ethernet interface of your router to your computer
1. Connect the end of the yellow Ethernet cable (RJ45/RJ45) supplied in the pack to the Ethernet fixed
connector (marked LAN1, LAN2, LAN3 or LAN4) of your router.
2. Connect the other end of the cable to your computer.
2.3.3.2 Connecting the Wi-Fi interface of your router to your computer
Wireless linking enables the router to be connected to your computer.
To make this connection you must have a Wi-Fi pack (option). This pack comprises the following elements:
• Wi-Fi 188470912 key (Dongle) in an anti-static plastic bag,
• CD-ROM.
Inserting a USB Wi-Fi key in your computer
This key should only be connected to your computer during installation of the Wi-Fi drivers (standard
802.11n) (see Quick Installation Guide).
Note
You can also use the Wi-Fi adapter incorporated in your computer.
To Next Page
Loading...
