SAGEMCOM F@ST 4310 User Manual

5- Information / Configuration
F@ST 4310 Reference Manual Page 5-57
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
5.7.6 Security
5.7.6.1 IP Filtering
Outgoing
Object: This menu is used to create outgoing IP filters to refuse data from the LAN to the WAN and list the
existing outgoing IP filters.
By default, all the outgoing data is accepted.
• In the Advanced Setup menu, select Security > IP Filtering > Outgoing.
The following screen opens:
Field Meaning
Filter Name Name of the filter.
IP Version IP version used.
Protocol Transport protocol.
SrcIP/ PrefixLength
"Source" address (your computer, for example) and
associated subnet mask.
Source Port Source port.
DstIP/ PrefixLength
"Destination" address (a machine on the Internet, for
example) and associated subnet mask.
DstPort Destination port.
Remove
Check the box and click on the [Remove] button to
remove the object from this list.

SAGEMCOM F@ST 4310 Specifications

General

Brand	SAGEMCOM
Model	F@ST 4310
Category	Network Router
Language	English