SAGEMCOM F@ST 4310 User Manual

5- Information / Configuration
Page 5-58 F@ST 4310 Reference Manual
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
Add
• Click on the Add button to display the following screen:
Field Action
Filter Name Enter a representative name for the filter.
IP Version
Select the dedicated IP version from the scroll down list (for example:
IPv4).
Protocol
Select the dedicated protocol from the scroll down list (TCP/UDP, TCP,
UDP, ICMP).
Source IP
address[/prefix
length]
Enter the Source IP address (LAN).
Source Subnet Mask Subnet Mask.
Source Port
(port or port:port)
Enter a "Source" port (LAN) or range of ports.
Note: For one port, for example, enter 80.
For a range of ports, enter 80:90.
Destination IP
address[/prefix
length]
Enter the Destination IP address (WAN).
Destination Port
(port or port:port)
Enter a "Destination" port (WAN) or range of ports.
Note: For one port, for example, enter 80.
For a range of ports, enter 80:90.

SAGEMCOM F@ST 4310 Specifications

General

Brand	SAGEMCOM
Model	F@ST 4310
Category	Network Router
Language	English