SAGEMCOM F@ST 4310 User Manual

5- Information / Configuration
F@ST 4310 Reference Manual Page 5-53
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
5.7.5.2 Port Triggering
Object: The purpose of this menu is to open dynamically the firewall ports (open ports) via "Trigger Ports"
when an application (such as games or video) opens a connection via the transport layer (TCP or
UDP).
• In the Advanced Setup menu, select NAT then select Port Triggering.
The following screen opens:
Field Meaning
Application Name Application name.
Trigger
• Protocol: Transport protocol (TCP, UDP or TCP/UDP).
• Port Range: A port range contains a Start port and an End port.
Note: A single port is characterised by an identical start port and end port.
Open
• Protocol: Transport protocol (TCP, UDP or TCP/UDP).
• Port Range: A port range contains a Start port and an End port.
Note: A single port is characterised by an identical start port and end port.
WAN Interface WAN Interface used.
Remove
To remove an entry from the list, check the box and click on the [Remove]
button.

SAGEMCOM F@ST 4310 Specifications

General

Brand	SAGEMCOM
Model	F@ST 4310
Category	Network Router
Language	English