SAGEMCOM F@ST 4310 User Manual

5- Information / Configuration
F@ST 4310 Reference Manual Page 5-97
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
5.8.2.1 WPS Setup
5.8.2.2 Manual Setup AP
Field Action/Meaning Default value
Enable WPS Check the box to activate WPS. Enabled
Add Client
a
a. This feature is available only when WPA-PSK, WPA2 PSK or OPEN mode is configured.
Choose the method to bind a client:
• Push-Button
• PIN
PIN
Set Authorized
Station MAC
Set authorised MAC clients. -
Set WPS AP
Mode
Choose whether you router is already configured or not. Configured
Setup AP
Configure all security settings with an external registar
• Push-Button
• PIN
PIN
Device PIN CPE PIN number -
Field Action/Meaning Default value
Select SSID
Select the "SSID" of your choice from the scroll down list
(sagem or Guest).
SAGEM_ABCD
Network
Authentication
From the scroll down list, select the security adapted to your
router's wireless network.
This choice will modify the Wireless configuration screen.
For more details, a summary table is presented below in
section Network Authentication (see subsection 5.8.2.3).
Open
WEP Encryption
Select from the scroll down list:
• Disabled to not use WEP encryption.
• Enabled to use WE encryption (see subsection WEP).
Disabled

SAGEMCOM F@ST 4310 Specifications

General

Brand	SAGEMCOM
Model	F@ST 4310
Category	Network Router
Language	English