SAGEMCOM F@ST 4310 User Manual

5- Information / Configuration
Page 5-106 F@ST 4310 Reference Manual
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
Mixed WPA2/WPA-PSK
Object: This encryption mode applies the functionalities of the WPA2-PSK and WPA-PSK protocols. It
does not need a "RADIUS" authentication server.
• Select the Mixed WPA2 /WPA-PSK security from the scroll down list; the following screen appears:
Field Action/Meaning Default value
Network Re-auth
Interval
Enter a value (in seconds) which determines the period
after which the WPA key will be certified.
36000
WPA Group Rekey
Interval
Enter a value (in seconds) which determines the period
after which the WPA key will be regenerated
(Renewing) in broadcast / multicast (LAN broadcast).
0
RADIUS Server IP
Address
Enter the IP address of the "RADIUS" authentication
server.
0.0.0.0
RADIUS Port
Enter the port used by the "RADIUS" authentication
server.
1812
RADIUS Key
Enter the secret key shared between the authentication
server and its clients.
-
WPA/WAPI
Encryption
Select the WPA encryption required from the scroll
down list:
• TKIP (Temporal Key Integration Protocol)
• AES (Advanced Encryption Standard)
• TKIP + AES
TKIP + AES
WEP Encryption
Select from the scroll down list:
• Disabled to use WPA encryption only.
• Enabled to use both WPA and WEP encryption.
Disabled

SAGEMCOM F@ST 4310 Specifications

General

Brand	SAGEMCOM
Model	F@ST 4310
Category	Network Router
Language	English