SAGEMCOM F@ST 4310 User Manual

6- Internet access service
Page 6-2 F@ST 4310 Reference Manual
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
The router has been designed to enable you to access the Internet as simply as possible.
Most of the router's parameters are already set:
• It is configured by default as a DHCP server.
• It relays DNS queries from the local network to the Internet.
Depending on your contract with your Internet Service Provider (ISP), you can also have access to television
on ADSL (see section 8).
The configuration parameters of your router are entered during installation (connection identifier, connection
password). These parameters can also be entered or modified in the Internet connection menu of the
HTTP configuration tool (PPP Username, PPP Password).
Observations
If the terminals are not DHCP clients, your local network then uses a static addressing plan.
Check that:
• the router belongs to this addressing plan,
• the default gateway of the equipment in the local network matches the address of your router,
• the DNS addresses are correctly configured in each terminal. The router enables DNS queries to be
relayed.
PPPoA or PPPoE
Routed or Bridged

SAGEMCOM F@ST 4310 Specifications

General

Brand	SAGEMCOM
Model	F@ST 4310
Category	Network Router
Language	English