5- Information / Configuration
F@ST 4310 Reference Manual Page 5-29
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
Select DNS Server Interface from available WAN interfaces
• Click on the Next button to continue configuring the remote network (WAN) in PPPoE mode.
• Click on the Apply/Save button to confirm the new WAN service.
Use the following Static
DNS IP address
If you check this box, you must enter DNS server
addresses.
Not checked
Primary DNS server Enter a primary DNS server address. -
Secondary DNS server Enter a secondary DNS server address. -
Button Action
Transfer the interfaces selected in the Available WAN
Interfaces area to the Selected DNS Server Interfaces area.
Transfer the interfaces selected in the Selected DNS Server
Interfaces area to the Available WAN Interfaces area.
Field Description
NAT Displays the status of the NAT.
Firewall Displays the status of the firewall.
IGMP Multicast Displays the status of the IGMP function.
Quality of Service Displays the status of the Quality of Service function.
Field Action Default value
To Next Page
Loading...
