SAGEMCOM F@ST 4310 User Manual

5- Information / Configuration
F@ST 4310 Reference Manual Page 5-31
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
• Click on the Next button to continue configuring the WAN service.
Field Action
Default
value
Obtain an IP address
automatically
Check the box to obtain an IP address automatically from your
router's DHCP server.
Checked
Option 60 Vendor ID
This feature allows a DHCP server to differentiate between the two
kinds of client machines and process the requests from the two
types of modems appropriately.
If this feature is enabled on the DHCP server, and you want to use
it, enter the vendor ID.
-
Option 61 IAID
This features allows a DHCP server to use an Identity Association
IDentifier (IAID).
If this feature is enabled on the DHCP server, and you want to use
it, enter the DHCP Identity Association ID.
-
Option 61 DUID
This features allows a DHCP server to use a DHCP Unique
IDentifier (DUID).
If this feature is enabled on the DHCP server, and you want to use
it, enter the DHCP Unique IDentifier.
-
Option 125
This feature allows you to enable/disable the DHCP
Vendor-Identifying Vendor-Specific 125 option.
Disable
Use the following
Static IP address:
If you check this box, you must enter a static WAN IP address and
the dedicated WAN subnet mask and WAN gateway IP address.
Not
checked
WAN IP Address Enter the static IP address. -
WAN Subnet Mask Enter the subnet mask. -
WAN gateway IP
address
Enter the gateway IP address. -

SAGEMCOM F@ST 4310 Specifications

General

Brand	SAGEMCOM
Model	F@ST 4310
Category	Network Router
Language	English