SAGEMCOM F@st Plug 502W User Manual

F@st Plug 502W PLC Wireless Router
- 10 -
The following table describes pushbuttons on the front panel:
Button Description
Security
It is used to set the status of the device members.
Press and hold the Security pushbutton for more than 10 seconds to
exit the current network and generate a random password of network
member.
Press and hold the Security pushbutton for less than 3 seconds, and
then the PLC wireless router becomes a member of the existing
AVLN.
Reset
Press the Reset pushbutton for more than 3 seconds and then
release it. System restores the factory default settings.
WPS
It has the following functions:
Press the WPS pushbutton for less than 3 seconds to enable the
negotiation of PBC mode.
Press the WPS pushbutton for more than 5 seconds to enable or
disable WLAN.
Interface Description
21
off / on
The following table describes interfaces on the PLC wireless router:
Interface Description
1
RJ45 LAN interface, for connecting a hub, switch, or computer on a
LAN
2
RJ45 LAN interface, for connecting a hub, switch, or computer on a
LAN or WAN over Ethernet interface
off / on Power switch

SAGEMCOM F@st Plug 502W Specifications

General

Brand	SAGEMCOM
Model	F@st Plug 502W
Category	Wireless Router
Language	English