SAGEMCOM F@st Plug 502W User Manual

F@st Plug 502W PLC Wireless Router
- 60 -
Click Advanced Network > IGMP on the left pane or click IGMP in the ADVANCED
NETWORK page to display the following page.
In this page, you may choose to enable or disable IGMP Snooping and IGMP Proxy.
When IGMP Snooping is enabled, only the host machines in multicast groups receive
multicast packets. Once the host machines are not in the groups, they no longer receive
multicast packets.
When IGMP Proxy is enabled, you may choose to enable or disable IGMP proxy of WAN
connection.
After configuration, click Apply to save the settings.
DDNS
DDNS service realizes the mapping of dynamic IP addresses to a fixed host name. All users
on the Internet may access this host using the name. The ISP assigns IP address via DHCP,
therefore it is difficult to find a specific host in a LAN via DNS.
For example, when you use a public Web server or VPN server in a LAN, you can ensure a
host be found when its IP address changes through using DDNS service.
Click Advanced Network > DDNS on the left pane or click DDNS in the ADVANCED
NETWORK page to display the following page.
In this page, you can configure DDNS parameters.

SAGEMCOM F@st Plug 502W Specifications

General

Brand	SAGEMCOM
Model	F@st Plug 502W
Category	Wireless Router
Language	English