SAGEMCOM F@st Plug 502W User Manual

PLC Wireless Router F@st Plug 502W
- 13 -
Configuring the LAN PC
By default, the DHCP server is enabled. The LAN IP address of the PLC wireless router is
192.168.1.1 and the subnet mask is 255.255.255.0.
Note
The configuration steps and figures on Windows XP are depicted as an example.
The configuration process may vary depending on operation system of your PC.
To manually set the network adapter on a Windows XP PC, do as follows:
Step 1 Right-click the icon of My Network Places and choose Properties from the menu.
The Network Connections window appears.
Step 2 Right-click the network adapter icon and choose Properties from the menu.
The Local Area Connections Properties window appears.

SAGEMCOM F@st Plug 502W Specifications

General

Brand	SAGEMCOM
Model	F@st Plug 502W
Category	Wireless Router
Language	English