EasyManuals Logo

SAGEMCOM F@st Plug 502W User Manual

SAGEMCOM F@st Plug 502W
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
PLC Wireless Router F@st Plug 502W
- 5 -
Safety Precautions
This device is intended for connection to the AC power line. Before using this product, please
read the following precautions:
Follow all warnings and instructions marked on the product.
Unplug the device from the wall outlet before cleaning. Use a dry cloth for cleaning. Do
not use liquid cleaners or aerosol cleaners.
Do not put this product near water.
Do not put this product near a radiator or heat source.
Do not use an extension cord between the device and the AC power source.
Only a qualified technician should service this product. Opening or removing covers
may result in exposure to dangerous voltage points or other risks.
Unplug the device from the wall outlet and refer the product to qualified service
personnel for the following conditions:
If liquid has been spilled into the product
If the product has been exposed to rain or water
If the product does not operate normally when the operating instructions are followed
If the product exhibits a distinct change in performance
Warning: This product is equipped with a socket: recommendations also apply to
the device to be connected through this outlet (see section Erreur ! Source
du renvoi introuvable.)
There is an identification label under the appliance or on the rear panel.
Read it, it gives you all the information on the mains voltage, current and frequency for
which your appliance was designed.
Never open the appliance! There is a risk of electric shock. Any work on the appliance
must be carried out by a qualified person.
Avoid violent mechanical shocks: do not use the appliance if it is damaged.
Make sure that the appliance is out of reach of children or pets.
Never connect your appliance to a socket that has come loose, or is damaged or
defective - you may receive an electric shock.
Never touch the appliance with damp or wet hands. You may get an electric shock.
Install the appliance in a dry, well aired place. Protect them from moisture and dust.
Install the appliance indoors out of the sun and rain; avoid extremes of temperature.
Use the appliance in an environment where the following conditions apply:
ambient temperature: between 0 °C [32°F] and 40 °C [104°F],
ambient humidity: between 20% and 90%.
Keep the appliance away, from sources of heat such as radiators or gas/electric
heaters. Do not place incandescent objects such as candles on the appliance.
Do not place any object on the appliance (this would interfere with the ventilation): the
vent slots in the casing are there to protect your appliance from overheating. Do not
place any object such as a piece of fabric or paper on these slots.
To avoid short-circuits (with a risk of fire or electric shock), place your appliance away
from the damp. If any liquid comes into contact with your appliance (drops, splashes), it
will damage it and may cause irremediable breakdown. If a liquid does enter the
appliance, unplug it immediately from the mains and contact your retailer electrician.
Make sure that the device is properly inserted into the mains.
Never place objects, walk, or pass a wheeled appliance on the device. You may
damage it and cause a risk of fire or electric shock.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SAGEMCOM F@st Plug 502W and is the answer not in the manual?

SAGEMCOM F@st Plug 502W Specifications

General IconGeneral
BrandSAGEMCOM
ModelF@st Plug 502W
CategoryWireless Router
LanguageEnglish

Related product manuals