SAGEMCOM F@st Plug 502W User Manual

PLC Wireless Router F@st Plug 502W
- 61 -
The following table describes parameters in this page:
Field Description
Enable Dynamic
DNS
Enable or disable dynamic DNS.
Server Address
Select a DDNS provider from “oray.cn” and “dyndns.org”
according to your actual server.
Hostname Input the host name used to register to the DDNS supplier.
Username Input the username of your DDNS account.
Password Input the password of your DDNS account.
Confirm Password Input your DDNS password again.
After setting, click “Apply” to save the settings.
PLC Setting
Choose ADVANCED > PLC Setting, and the following page appears.
In this page, you can configure the parameters of PLC settings.
Local Device Configuration
The Local Device Configuration allows you to configure the local network password and to
view the information of the local device such as MAC, and firmware version.
WAN Port Switch
WAN port switch function is used to switch the WAN interface of the PLC router. Check the
Ethernet Port, and then the LAN2 interface serves as a WAN interface. Check PLC Power
Line, and the two LAN interfaces still serve as the LAN interfaces, and the power line
interface serves as a WAN interface.

SAGEMCOM F@st Plug 502W Specifications

General

Brand	SAGEMCOM
Model	F@st Plug 502W
Category	Wireless Router
Language	English