SAGEMCOM F@st Plug 502W User Manual

PLC Wireless Router F@st Plug 502W
- 67 -
TFTP Upgrade Mode
If you select TFTP from the drop-down list of upgrade mode, the following page appears.
The following table describes parameters in this page:
Field Description
Firmware Version Display current firmware version.
Upgrade Mode Select TFTP.
Server IP Address Enter the IP address of TFTP server.
Server Port Enter the port number of TFTP server.
Directory Enter the firmware directory.
Clear Config
If you check Clear Config, the PLC router restores to the
default settings after upgrade. Otherwise, the PLC router
keeps the current settings.
FTP Upgrade Mode
If you select FTP from the drop-down list of upgrade mode, the following page appears.

SAGEMCOM F@st Plug 502W Specifications

General

Brand	SAGEMCOM
Model	F@st Plug 502W
Category	Wireless Router
Language	English