SAGEMCOM F@st Plug 502W User Manual

PLC Wireless Router F@st Plug 502W
- 35 -
Wireless Setup
Choose SETUP > Wireless Setup, and the following page appears.
Wireless Basic Settings
Choose Wirelss Setup > Wireless Basic on the left pane or click Wireless Basic in the
WIRELESS SETUP page to display the following page.
In this page, you can configure the basic wireless parameters.
The following table describes parameters in this page:
Field Description
Enable Wireless
Interface
Enable or disable the wireless interface.
Wireless Network Name
(SSID)
The wireless network name (SSID) can contain up to 32
characters and can be letters, numerals, underlines, and any
combinations of them. The SSID is case-sensitive.
Visibility Status
If Visible is selected, the PLC wireless router broadcasts its
SSID on the wireless network.
If Invisible is selected, the PLC wireless router does not
broadcast its SSID on the wireless network.
Region Select the country where you are from the drop-down list.

SAGEMCOM F@st Plug 502W Specifications

General

Brand	SAGEMCOM
Model	F@st Plug 502W
Category	Wireless Router
Language	English