SAGEMCOM F@st Plug 502W User Manual

PLC Wireless Router F@st Plug 502W
- 17 -
Setup
Wizard
You can set the basic network parameters for accessing the Internet by following this wizard.
To configure the wizard, do as follows:
Step 1 Choose SETUP > Wizard, and the following page appears.
Note
When you order the broadband service, pay attention to the Internet connection
type. The PLC wireless router adopts Ethternet connection. Technical parameters
of Internet connection properities are provided by your Internet service provider
(ISP). For example, your ISP should tell you whether the Internet connection mode
is static IP or dynamic IP, and whether the protocol used for Internet communication
is DHCP or PPPoE.
Step 2 Click Setup Wizard to display the following page:

SAGEMCOM F@st Plug 502W Specifications

General

Brand	SAGEMCOM
Model	F@st Plug 502W
Category	Wireless Router
Language	English