F@st Plug 502W PLC Wireless Router
- 68 -
The following table describes parameters in this page:
Field Description
Firmware Version Display current firmware version.
Upgrade Mode Select FTP.
Server IP Address Enter the IP address of FTP server.
Server Port Enter the port number of FTP server.
User Name Enter the username for connecting to the FTP server.
Password Enter the password for connecting to the FTP server.
Directory Enter the firmware directory.
Clear Config
If you check Clear Config, the PLC router restores to the
default settings after upgrade. Otherwise, the PLC router
keeps the current settings.
HTTP Upgrade Mode
If you select HTTP from the drop-down list of upgrade mode, the following page appears.
The following table describes parameters in this page:
Field Description
Firmware Version Display current firmware version.
Upgrade Mode Select HTTP.
Server IP Address Enter the IP address of HTTP server.
Server Port Enter the port number of HTTP server.
User Name Enter the username for connecting to the HTTP server.
Password Enter the password for connecting to the HTTP server.
Directory Enter the firmware directory.
Clear Config
If you check Clear Config, the PLC router restores to the
default settings after upgrade. Otherwise, the PLC router
keeps the current settings.