SAGEMCOM F@st Plug 502W User Manual

PLC Wireless Router F@st Plug 502W
- 69 -
HTTPS Upgrade Mode
If you select HTTPS from the drop-down list of upgrade mode, the following page appears.
The following table describes parameters in this page:
Field Description
Firmware Version Display current firmware version.
Upgrade Mode Select HTTPS.
Server IP Address Enter the IP address of HTTPS server.
Server Port Enter the port number of HTTPS server.
User Name Enter the username for connecting to the HTTPS server.
Password Enter the password for connecting to the HTTPS server.
Directory Enter the firmware directory.
Clear Config
If you check Clear Config, the PLC router restores to the
default settings after upgrade. Otherwise, the PLC router
keeps the current settings.
Click Apply, and then system begins to upgrade firmware.
After upgrade completes, the PLC wireless router automatically reboots.
Caution
To avoid losing previous configuration of the router, save the configuration before
upgrade.
During upgrade, do not power off the PLC wireless router or press the Reset
pushbutton.
The default upgrade mode is Local, and it supports only the firmware with the format
‘.img’.

SAGEMCOM F@st Plug 502W Specifications

General

Brand	SAGEMCOM
Model	F@st Plug 502W
Category	Wireless Router
Language	English