F@st Plug 502W PLC Wireless Router
- 40 -
WPA/WPA2-PSK
Select WPA/WPA2-PSK from the drop-down list of wireless security mode to display the
following page.
The following table describes parameters related to the WPA/WPA2 Mixed mode:
Field Description
WPA Mode Only WPA/WPA2 Mixed-Personal is available.
Encryption Mode You can only select Both.
Group Key Update
Interval
Set the update interval of group key.
Pre-shared Key
Set the pre-shared key. The PLC wireless router uses this
key to authenticate the identity of workstation.
After setting the parameters, click Apply to save the settings.