F@st Plug 502W PLC Wireless Router
- 4 -
About the User Manual
In purchasing this device, you have chosen a quality product made by Sagemcom.
Your device allows you to create a WiFi point and so enjoy an Internet connection. We
recommend that you read the chapters on security below.
This user manual mainly describes how to install and configure the F@st Plug 502W.
Our company reserves the right to modify this manual for product upgrade or other causes
without notifying users in advance. This user manual is only for reference.
Features
PLC Features
• Power voltage range is 100 to 240 V AC, 50/60 Hz.
• Support the HomePlug AV protocol and the IEEE1901 protocol.
• PLC physical link rate is up to 500 Mbps.
• Support the following modulation schemes: OFDM QAM 4096/1024/256/64/16/8,
QPSK, BPSK, and ROBO.
• Support 128-bit AES link encryption and user NMK authentication, for providing secure
power line communication.
• Support windowed OFDM with noise mitigation based on patented line synchronization
technique, for improving data integrity in noisy conditions.
• Support channel self-adaptation and channel estimation for maximizing real-time
throughput.
• Support priority-based CSMA/CA channel access scheme for maximizing efficiency
and throughput.
• Support four-level QoS.
• Support ToS and CoS packet classifications.
• Support IGMP multicast management session.
Wireless Features
• Support IEEE802.11b, IEEE802.11g, IEEE802.11n, IEEE802.3, IEEE802.3u,
IEEE802.11i and IEEE802.11e.
• Support 2T2R mode. Transmission data rate is up to 300 Mbps.
• Support WEP and WPA for secure data transmission.
• Support DHCP server.
• Support version upgrade through Web page.
• Support restoring factory default settings.
• Support the following wireless security modes: WEP, WPA, WPA2, and WPA/WPA2
Mixed.
• Support system status display.
• Support system log.
To Next Page
Loading...
Need help?
General
