SAGEMCOM F@st Plug 502W User Manual

F@st Plug 502W PLC Wireless Router
- 82 -
Leaving an AVLN Network
Assume that a network exists. If you want to remove one device, the ‘leaver’ from an AVLN
network, or remove the device from the existing network and have it join another logical
network, do as follows:
Step 1 Press the Security pushbutton on the ‘leaver’ for more than 5 seconds. The device
will reset and restart with a random NMK.
Step 2 Wait for reset to complete.
The Power LED indicator on the ‘leaver’ will momentarily extinguish during reset and flash
during restart, then illuminate steadily. The ‘leaver’ is removed from the existing network
successfully.
Once the process completes, you may disconnect the device from the medium or join it to
another logical network on the same medium.

SAGEMCOM F@st Plug 502W Specifications

General

Brand	SAGEMCOM
Model	F@st Plug 502W
Category	Wireless Router
Language	English