F@st Plug 502W PLC Wireless Router
- 28 -
The following table describes parameters related to the WPA/WPA2 Mixed mode:
Field Description
WPA Mode Only WPA/WPA2 Mixed-Personal is available.
Encryption Mode You can only select Both.
Group Key Update
Interval
Set the update interval of group key.
Pre-shared Key
Set the pre-shared key. The PLC wireless router uses this
key to authenticate the identity of workstation.
Step 11 After selecting the proper wireless security mode and its relevant parameters, click
Next to display the following page.
Step 12 In this page, you can view the configuration information of the PLC wireless router.
If you want to modify some settings, click Back. If you want to make the settings
take effect, click Complete.
Note
In any configuration page of Wizard, you can click Back to modify the previous
settings, or click Cancel to exit the page.