3.2
Section 3
Device Installation
Wireless Internet
gateway
USB to
micro USB cable
USB power
adapter
To Internet router
(supplied by
network provider)
Plug into 120V outlet
Multi button
LED light ring
Ethernet cable
Gateway is connected to the internet and
communicating with SALUS Smart Home services
Gateway is not connected
to the internet
Gateway is waiting
for device pairing
Gateway is powering up and
attempting to establish connections
Gateway is in identify mode
Solid Blue
Solid Green Flashing Green
Solid Red Flashing Red
Connected to
SALUS Smart Home
services.
Not Connected
to the Internet
7. When the SG888ZB Gateway powers up, the lighted ring around the multi button will be
solid green. The light will then turn red. Once an internet connection is detected (if plugged
into a router) the light will turn green. Using the internet connection, the SG888ZB Gateway
will try to connect with the SALUS Smart Home services. If successful, the light will turn blue.
LED Indications
To Next Page
Loading...
Need help?
General
