4.15
Section 4
The SG888ZB Gateway will begin ashing red while it is searching for the devices.
This will continue until the pair process is complete.
2. Use the Up arrow
to change to from
to .
3. Then press conrm
.
The AS20WRF/BRF Thermostat will
become visible on the SALUS Smart
Home application
4. When Thermostat
displays , press
conrm .
5. When the display shows
, press conrm
.
The AS20WRF/BRF Thermostat
will display the current
temperature, time and icon
showing temperature mode.
1 2 3 4 5 6 7
PM
Device Pairing & Setup
with Internet Connection
To Next Page
Loading...
