Chapter 3. Installing the Product 3 - 15
Zoom In
Selects the direction in which to rotate the Zoom dial to zoom in on an image.
- Clockwise: Rotating the dial-button clockwise zooms in on an image.
- Counterclockwise: Rotating the dial-button counter-clockwise zooms in on an image.
Set / Exit Key
Select the functions to assign to the buttons on the left and right sides of the trackball on
the control panel.
- L: Set / R: Exit: The left button is set to Set and the right button is set to Exit.
- L: Exit / R: Set: The left button is set to Exit and the right button is set to Set.
- L: Set / R: Set: Both the left and the right buttons are assigned the Set function.
▐ Sound
Generate a buzzer sound when a button or dial-button is used.
Buzzer Sound
Set this to on or off by using the trackball. When this is set to on, the buzzer sounds
each time a button or dial-button is used.
▐ Patient Information
Save patient Page as first images
Set this to on or off by using the trackball. If it is On, the Patient Information Entry screen
will be saved when creating an ID.
▐ Zoom Box Setup
Zoom Box Reference Position
Select the position of the Zoom Box Reference. You may select either Image or Zoom
Box.
To Next Page
Loading...