3 - 14 HS70A Service Manual
– Accessing SonoView/Patient
– Search window for patient
Set ID and Password
This is the exclusive administrator function for approval and management of accounts.
Account List window will be enabled.
– Add: Fill out the User ID, Password, and Name fields. Then click the Add button to
create a new ID.
– Modify: Save the changes.
– Delete: Delete the selected ID.
– Close: Close the settings.
Log-in
You can set the User Account ID after logging in to the Admin account. For Admin
account, contact a service engineer.
NOTE
The Admin account cannot be deleted.
Once the user account function is activated, you cannot load
other exams without logging in.
The password must be 6 to 15 characters and composed of at
least three of the following:
- English alphabet upper case
- English alphabet lower case
- Numbers
▐ Screen keyboard
Auto pop-up on patient Information
Set this to on or off by using the trackball. If it is set to on, the on-screen keyboard
appears automatically when entering patient information.
▐ Control
Trackball Speed For Scan Mode
Specify the trackball speed at scanning mode as Slow, Normal, or Fast.
Trackball Speed For Measurement
Specify the trackball speed at measurement as Slow, Normal, or Fast. Slower
speeds allow more precise measurements.
To Next Page
Loading...