Sartorius Centrisart G-16 - 3 Safety; Marking of the Unit

3 Safety
Version 09/2015, Rev. 1.3 of 02/03/2017
15
Translation of the original operating manual, WZG6001-e150401
Pos: 31 /100 Sigma/10 0 BA Zentrifugen Sigma (Sta ndardmodule)/03 0 Sicherheit/030 Sicherheit=== ===== =========== ========== ========= = @ 26\mod_1405319 007254_68.do cx @ 191877 @ 1 @ 1

3 Safety
Pos: 32 /010 Unive rsalmodule/ Leerzeile @ 0 \mod_1202116244 500_0.do cx @ 114 @ @ 1
Pos: 33 /100 Sigma/10 1 BA Zentrifugen Sartorius (Sta ndardmodule)/ 030 Sicherheit/030 -0011 Beschilderung des Ge räts (D-16 C, G-16, G-16C) Sar torius @ 37\ mod_1436954887097 _68.do cx @ 269166 @ 2 @ 1

3.1 Marking of the unit
The following symbols are used for all types of centrifuges manufactured by Sartorius:
Dangerous voltage
I
On (Power)
Hot surface
0
Off (Power)
Caution! Risk of bruising
Name plate (see chapter 2.1.2
- "Name plate")
Protective earth (ground)
CE mark in compliance with
the directive 2006/42/EC
Earth (ground)
Do not dispose as part of
domestic waste
Unplug the mains plug
GS mark (tested safety; only
for Germany)
Arrow indicating the direction
of rotation
NRTL mark (only for the USA
and Canada)
Label concerning the FCC rules
(only for Canada)
RCM mark
(only for Australia)
China RoHS 2 mark
(only for China)