Sartorius Centrisart G-16 - Control System Spincontrol L; User Interface

6 Using the centrifuge
30
Version 09/2015, Rev. 1.3 of 02/03/2017
Translation of the original operating manual, WZG6001-e150401
Pos: 116 /100 Sigma/1 00 BA Zentr ifugen Sigma (Sta ndardmodule)/0 60 Betrieb_Spin control L+S/Spi ncontrol L (Zent6)/ 060-0030 Spincontrol L Steuerung------ --------------- --------------- ---------- @ 27 \mod_1405319249 442_68.docx @ 192605 @ 2 @ 1

6.3 Control system "Spincontrol L"
Pos: 117 /100 Sigma/1 01 BA Zentr ifugen Sartorius (Sta ndardmodule) /060 Betrie b/Spincontrol L/060 -0030-0011 Bedienoberflä che L ohne Temp Sar torius @ 37\ mod_1437371 019533_68.do cx @ 272796 @ 3 @ 1

6.3.1 User interface
The centrifuge is operated via three buttons with integrated light-emitting diodes
and one function knob. The display is divided into several different fields. The
various functions of the system can be called up by pressing and turning the
function knob.
1 Start key
2 Function knob
3 Display
4 Stop key
5 Lid key
Fig. 8: User interface of the Spincontrol L control system
Display
The centrifuge display has the following display fields:
1 Speed/rcf field
2 Various display fields
(e.g. for rotor, curve, or
program selection)
3 Time field
Fig. 9: Display of the Spincontrol L control system
Pos: 118 /010 Unive rsalmodule/Seite nwechsel @ 0\m od_12021162 44312_0.docx @ 105 @ @ 1