8 Maintenance and service
Version 09/2015, Rev. 1.3 of 02/03/2017
Translation of the original operating manual, WZG6001-e150401
Pos: 184 /100 Sigma/1 01 BA Zentr ifugen Sartorius (Sta ndardmodule) /080 Wartung und Instandhalt ung/080-0030 Instandhaltungsa rbeiten Sart orius @ 36\m od_1431074999924_6 8.docx @ 2620 30 @ 2 @ 1
8.3 Service
In the event of service work that requires the removal of the panels, there is a risk
of electric shock or mechanical injury. Only qualified specialist personnel is
authorised to perform this service work.
The centrifuge is subject to high mechanical stress. In order to be able to withstand
this high level of stress, high-quality components were used during the production
of the centrifuge. Nevertheless, wear cannot be excluded and it may not be visible
from the outside. Especially the rubber parts that are among other things part
of the motor suspension, are subject to ageing.
This is why we recommend having the centrifuge checked by the manufacturer
during an inspection once per year in the operating state and once every three
years in the dismantled state. Rubber parts should be replaced after three years.
Information and appointments
Please find the corresponding contact data for your region on our website
www.sartorius.com.
If you would like to utilise our service, please state the type of your centrifuge
and its serial number.
Pos: 185 /010 Unive rsalmodule/Seite nwechsel @ 0\m od_12021162 44312_0.docx @ 105 @ @ 1
To Next Page
Loading...
