Version 09/2015, Rev. 1.3 of 02/03/2017
Translation of the original operating manual, WZG6001-e150401
6.3.2.8 Acceleration and deceleration curves
Acceleration
This function is used to select an acceleration curve. The system offers 10 fixed,
programmed acceleration curves (curves 0-9).
Brake
This function is used in order to select a curve that decelerates the centrifuge to a
standstill. Deceleration curves are inverted images of the acceleration curves and
are labelled with identical numbers. Deceleration curve no. 0 represents a brakeless
deceleration.
Fig. 16: Preselection of a curve; here: preselection of an acceleration curve
Pos: 135 /010 Unive rsalmodule/Seite nwechsel @ 0\m od_12021162 44312_0.docx @ 105 @ @ 1
Pos: 136 /100 Sigma/1 01 BA Zentr ifugen Sartorius (Sta ndardmodule) /060 Betrie b/Spincontrol L/060 -0030-0020-01 01 Automat ische Deckelöffnu ng - ohne Temp Sa rtorius @ 37\ mod_1437374 458693_68.do cx @ 272980 @ 4 @ 1
6.3.2.9 Automatic lid opening function ("AutoOpen")
The automatic lid opening function must be activated so that the lid opens
automatically at the end of the operation.
In order to activate the automatic lid opening function:
Select the "Auto Open" symbol with the cursor and confirm the selection. The
symbol and the bar under the symbol start to flash.
Activate the function by turning the function knob. The symbol remains
displayed in a permanent manner and the bar continues to flash.
Turning the function knob further will deactivate the function. In this case, the
symbol disappears but the bar continues to flash.
Press the function knob in order to activate the desired setting. The bar remains
visible as long as the cursor is placed over the symbol.
Fig. 17: The automatic lid opening function "Auto Open" is activated
Pos: 137 /010 Unive rsalmodule/ Leerzeile @ 0 \mod_120211624 4500_0.do cx @ 114 @ @ 1
Pos: 138 /100 Sigma/1 01 BA Zentr ifugen Sartorius (Sta ndardmodule) /060 Betrie b/Spincontrol L/060 -0030-0020-01 11 Akustisc hes Signal - ohne Temp Sartorius @ 37\mod_1 437374459371_68. docx @ 273010 @ 4 @ 1
To Next Page
Loading...
