Version 09/2015, Rev. 1.3 of 02/03/2017
Translation of the original operating manual, WZG6001-e150401
Pos: 150 /100 Sigma/1 01 BA Zentr ifugen Sartorius (Sta ndardmodule) /060 Betrie b/Spincontrol L/060 -0030-0030-00 21 Progra mm laden - ohne Temp Sartorius @ 37\mod_14373 74504790_68.do cx @ 273130 @ 4 @ 1
6.3.3.2 Loading a program
Select the menu item "run Prog" and confirm the selection. The indication "run"
flashes in the activated status.
Select the desired program and confirm the selection by pressing the function
knob.
The program is now loaded.
Fig. 24: Loading a program
Pos: 151 /010 Unive rsalmodule/ Leerzeile @ 0 \mod_120211624 4500_0.do cx @ 114 @ @ 1
Pos: 152 /100 Sigma/1 00 BA Zentr ifugen Sigma (Sta ndardmodule)/0 60 Betrieb_Spin control L+S/060 -0040 Auss chalten @ 27\ mod_1405319212716 _68.docx @ 19 2591 @ 2 @ 1
6.4 Switching the centrifuge off
Open the centrifuge when it is not in use so moisture can evaporate.
Switch the centrifuge off by pressing the mains power switch.
Pos: 153 /010 Unive rsalmodule/Abs chnittswechsel @ 0\mod_12021245 14062_0. docx @ 418 @ @ 1
Pos: 154 /010 Unive rsalmodule/Seite nwechsel @ 0\m od_12021162 44312_0.docx @ 105 @ @ 1
To Next Page
Loading...
