Version 09/2015, Rev. 1.3 of 02/03/2017
Translation of the original operating manual, WZG6001-e150401
Safety indications on the centrifuge must be kept readable at all times. If
necessary, they must be replaced.
Not all of the symbols/labels are used for this centrifuge type.
Pos: 34 /010 Unive rsalmodule/ Leerzeile @ 0 \mod_1202116244 500_0.do cx @ 114 @ @ 1
Pos: 35 /100 Sigma/10 0 BA Zentrifugen Sigma (Sta ndardmodule)/03 0 Sicherheit/030- 0020 Symbol- und Hin weiserklärunge n @ 26\mod_14053 19013955_68.do cx @ 191947 @ 2 @ 1
3.2 Explanation of the symbols and notes
In this operating manual, the following names and symbols to indicate hazards are
used:
This symbol stands for a direct hazard to the life and health of persons.
Non-observance of these symbols causes serious health problems up to life-
endangering injuries.
This symbol stands for a direct hazard to the life and health of persons due to
electrical voltage.
Non-observance of these symbols causes serious health problems up to life-
endangering injuries.
This symbol stands for a potential hazard to the life and health of persons.
Non-observance of these symbols can cause serious health problems up to life-
endangering injuries.
This symbol indicates a potentially hazardous situation
Non-observance of these notes can cause minor injuries or damage to property.
This symbol indicates important information.
Pos: 36 /010 Unive rsalmodule/Seite nwechsel @ 0\mo d_120211624 4312_0.docx @ 105 @ @ 1
To Next Page
Loading...
