Version 09/2015, Rev. 1.3 of 02/03/2017
Translation of the original operating manual, WZG6001-e150401
Pos: 144 /100 Sigma/1 01 BA Zentr ifugen Sartorius (Sta ndardmodule) /060 Betrie b/Spincontrol L/060 -0030-0020-01 41 Eingabe sperre - ohne Tem p Sartorius @ 3 7\mod_143737446 0769_68.docx @ 273070 @ 4 @ 1
6.3.2.13 Input lock
In order to prevent the centrifuge from being manipulated by unauthorised
persons, inputs can be disabled via the menu. Inputs via the keypad, i.e. for starting
or stopping a centrifugation run or for opening the lid, are enabled.
Activating a simple input lock:
Position the cursor over the symbol " " in the lower right-hand corner of the
display.
As long as the symbol is displayed, the parameters of the centrifuge cannot be
changed.
Activating a permanent input lock:
Press the start key three times and hold for approximately 2 seconds when
pressing it for the third time.
After the activation of this function, the padlock symbol flashes. The input lock is
activated.
Proceed in the same manner in order to deactivate the permanent input lock.
Fig. 22: "Padlock" symbol indicating an activated input lock
Pos: 145 /010 Unive rsalmodule/Seite nwechsel @ 0\m od_12021162 44312_0.docx @ 105 @ @ 1
To Next Page
Loading...
