71
Using a barcode scanner to enter an identifier
Identifiers can be entered via a barcode scanner.
Operating menu setting: “
Device parameters:Bar code:oID"
The value is applied and saved automatically.
Scanning barcodes directly
You can directly scan a barcode using the barcode scanner.
Operating menu setting: “
Device parameters:Bar code:oInput"
The barcode can contain the following codes:
– “I" for write identifier
– “T" for save tare memory
– “R" for write reference weight
– “A" for activate product data memory
Examples:
“I4Anton" = write the character string to ID 4: Anton
“TC1" = write 1 Kg to the preset tare memory.
“C" = unit: Kilograms
“B" = grams
“D" = carat,
etc.
“RC0.0023" = write 0.0023 kg as the reference weight
“A1" = load product data memory 1
Operation
To Next Page
Loading...
Need help?
General
