SATO CL4NX User Manual

13
Using the head
cleaning fluid
• Use of flame or heat around the head cleaning fluid is prohibited.
Absolutely do not heat it or subject it to flames.
• Keep the fluid out of reach of children to prevent them from
accidentally drinking it. If a child accidentally drinks the fluid,
immediately consult with a physician.
Laser beam
• Do not look into the laser radiation window, and do not direct the
laser beam at someone. If the laser beam hits eyes, it may cause
visual disturbance.
Print head
• The print head is hot after printing. Be careful not to get burned when
replacing media or cleaning immediately after printing.
• Touching the edge of the print head with bare hands could result in
injury. Be careful not to become injured when replacing media or
cleaning.
• The customer should not replace the print head. Doing so could
result in injury, burns or electric shock.
Do not use in
hazardous locations
• The printer is not explosion proof certified.
• Do not use in a potentially explosive environment or atmosphere.
Do not place in areas
with high humidity
• Do not place the printer in areas with high humidity or where
condensation forms. If condensation forms, immediately turn off the
power switch and do not use the printer until it dries. Using the printer
while condensation is on it could result in electric shock.
Carrying the printer
• When moving the printer, always unplug the power cord from the
outlet and check to make sure all external wires are disconnected
before moving it. Moving the printer with the wires still connected
could damage the cords or connecting wires and result in a fire or
electric shock.
• Do not carry the printer with media loaded in it. The media could fall
out and cause an injury.
• When setting the printer on the floor or a stand, be sure not to get
your fingers or hands pinched under the printer feet.
• Do not carry the printer with the barcode checker stand installed. The
barcode checker stand could fall out and cause injury.

SATO CL4NX Specifications

General

Wi-Fi	No
Ethernet LAN	Yes
Flash memory	2000 MB
Storage media	Flash
Internal memory	256 MB
Built-in barcodes	Code 39, Code 93, Code-128 Codabar Library, EAN13, EAN8, GS1 DataBar, Industrial 2/5, Interleaved 2/5, Matrix 2/5
Internal storage capacity	2 GB
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	30 - 90 %
Operating relative humidity (H-H)	30 - 80 %
Maximum roll diameter	220 mm
Maximum printing width	104 mm
Printing media thickness	0.06 - 0.26 µm
Display type	LCD
Product color	Black
Display diagonal	3.5 \
Display resolution	320 x 240 pixels
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	50 - 60 Hz
USB connector	USB Type-A / USB Type-B
Bluetooth version	3.0
Serial interface type	RS-232C
USB 2.0 ports quantity	2
Connectivity technology	Wired & Wireless
Type	POS printer
Print speed	10 ips
Print technology	Direct thermal / Thermal transfer
Maximum resolution	203 x 203 DPI

Weight and Dimensions

Depth	457 mm
Width	271 mm
Height	321 mm
Weight	15000 g