Safety Precautions
14
Power supply
• Do not operate the power switch or plug in/ unplug the power cord
with wet hands. Doing so could result in electric shock.
Power cord
• Keep the power cord away from hot devices. Getting the power cord
close to hot devices could cause the cord’s covering to melt and
cause a fire or electric shock.
• When unplugging the power cord from the outlet, be sure to hold it by
the plug. Pulling it by the cord could expose or break the core wires
and cause a fire or electric shock.
• The power cord set that comes with the printer is especially made for
this printer. Do not use it with any other electrical devices.
Handling the barcode
checker stand kit
• Be careful avoid injury from pointed part of the barcode checker
stand kit.
Top cover
• Be careful not to get your fingers pinched when opening or closing
the top cover. Also be careful that the top cover does not slip off and
drop.
Loading media
• When loading a media roll, be careful not to get your fingers pinched
between the media roll and the supply unit.
When not using the
printer for a long time
• When not using the printer for a long time, unplug the power cord
from the outlet to maintain safety.
During maintenance
and cleaning
• When maintaining and cleaning the printer, unplug the power cord
from the outlet to maintain safety.
To Next Page
Loading...
