[Advanced]
242
[Adjustments]
Correct the offset position, print position and print darkness.
The setting items are as follows:
Offset
Adjusts the backfeed/stop position for Tear-off/Cut/Dispense operation.
Pitch
Adjusts the leading edge of media position thus effects the vertical print position placement.
Darkness Adjust
Fine tune the print darkness.
[Offset]
Correct the offset position.
Offset adjusts the backfeed/stop position for Tear-off/Cut/Dispense operation.
Set the value '+' to move the offset position in the direction opposite to the feed direction and '-' to
move in the feed direction.
The setting range varies depending on the print resolution of the printer.
The setting range is as follows:
To Next Page
Loading...
