SATO CL4NX - Page 248

[Advanced]
248
[Head Base Position]
Set the position used for the base reference point for printing.
The options are as follows:
Item CL4NX CL6NX
[Standard] Print with a standard base
reference point.
Print with a standard base
reference point.
[Left-justify] Move the base reference point 2
mm (0.08") to the left toward the
printer.
Expand the width of the printable
area (maximum print width) to 167.5
mm (6.59").
Move the base reference point 2
mm (0.08") to the left toward the
printer.
• A message prompting you to restart the printer will appear on the Online/Offline screen
if you have made any changes. In such a case, reboot the printer to apply the settings.