SATO CL4NX - Page 247

247
Resolution CL4NX CL6NX
203 dpi
(1 dot = 0.125 mm
(0.0049"))
0 to 2040 dots 0 to 2040 dots
305 dpi
(1 dot = 0.083 mm
(0.0033"))
0 to 3060 dots 0 to 3060 dots
609 dpi
(1 dot = 0.042 mm
(0.0017"))
0 to 6120 dots -
[Paper End]
Select the sensor for sensing the paper end.
The options are as follows:
Using I-mark
Use the I-mark sensor (reflective type) to detect the paper end.
Using Gap
Use the Gap sensor (transmissive type) to detect the paper end.