267
IP Address
Set and check the IP address.
If you have selected [DHCP] in the [Mode] menu, the screen shows the IP address you received
from the DHCP server.
If you have selected [Static] in the [Mode] menu, select to set the IP address.
Netmask
Set and check the subnet mask address.
If you have selected [DHCP] in the [Mode] menu, the screen shows the subnet mask address you
received from the DHCP server.
If you have selected [Static] in the [Mode] menu, select to set the subnet mask address.
Gateway
Set and check the default gateway address.
If you have selected [DHCP] in the [Mode] menu, the screen shows the gateway address you
received from the DHCP server.
If you have selected [Static] in the [Mode] menu, select to set the default gateway address.
DNS
Set and check DNS server addresses.
If you have selected [Static] in the [Mode] menu, select to set and check DNS server addresses.
•
After doing the settings, return to the [Wi-Fi] screen by pressing the button, and
then press the button to enable the new settings. Press the button
to cancel the new settings and return to the previous settings.
• When [Wi-Fi Direct] is active, [Mode], [DHCP] and [DNS] do not appear. In addition,
you cannot change [IP Address], [Netmask], or [Gateway] if [DHCP] or [Wi-Fi Direct] is
active. [DNS] cannot be changed if [Mode] is [DHCP].
[Mode]
Select the IP address assignment method.
The options are as follows:
To Next Page
Loading...
