[Network]
292
[PAC P/W]
Set the PAC password.
Appears only if you have selected [FAST] in the [EAP Mode] menu and if you have selected [Disabled]
in [PAC Auto Provisioning].
You can enter 0 to 64 characters. Alphabets, numbers and symbols can be used.
[Interface]
Select the network interface.
This item is to select the network interface from LAN or wireless LAN when you have installed the
optional wireless LAN.
The options are as follows:
Auto
Automatically select between LAN and wireless LAN interface at printer startup. LAN is selected if
LAN cable is connected to a link-established hub (Link LED is flashing) at printer startup. Wireless
LAN is selected if LAN is not detected at printer startup.
LAN
Use LAN interface (or force LAN interface).
Wi-Fi
Use wireless LAN interface (or force wireless LAN interface).
To Next Page
Loading...
