[Network]
344
Additional
Enable or disable the additional ARP announcement.
Periodic
Set the periodic timing for ARP announcement.
[Additional]
Set the additional ARP announcement.
The options are as follows:
Enabled
Enable the additional ARP announcement. The ARP is sent at 1, 2, 4, 8 and 16 seconds after the
link up/DHCP assignment.
Disabled
Disable the additional ARP announcement. The ARP is only sent at 1 second after the link up/
DHCP assignment.
[Periodic]
Set the interval of the ARP announcement in the range of 0 to 600 seconds.
To Next Page
Loading...
