[RFID] (CL4NX only)
368
Antenna Pitch
Set the antenna pitch.
Write Power
Set radio power level used to write information to RFID tag.
Read Power
Set radio power level used to read information from RFID tag.
Tag Offset
Set distance to print on label BEFORE pausing to encode RFID.
Reader Model
Shows the RFID module model.
Reader Version
Shows the RFID module firmware version.
View
Shows the RFID tag data.
Retry Mode
Set whether to retry encoding of failed data when an RFID error occurs.
Retries
Set the number of failed encoding attempts before error warning/print pause.
Mark bad tags
Set the error print for the RFID tag error.
Non-RFID Warning
Set the non-RFID warning message.
Log RFID Data
Set the log function to record the encoded tag information.
Data To Record
Set the data to be recorded.
Output Error Mode
Set the signal type for RFID errors.
Pulse Length
Set the length of an RFID error pulse.
◦ Appears only if you have selected [Pulse] in the [Output Error Mode] menu.
Counters
Shows the RFID counter.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
