SATO CL4NX - Page 394

[SBPL]
394
[ENQ Reply Delay]
Set the period to delay status reply to status request ENQ.
The target interfaces are LAN and Wireless LAN.
The target statuses are Status3, Status4 ENQ reply, and Status5.
The setting range is from 0 to 9999 ms.
[ENQ Reply Cycle]
Set the interval for the status reply cycle to status request ENQ.
The target interfaces are LAN and Wireless LAN.
The target status is Status4 reply cycle.
The setting range is from 100 to 999 ms.