SATO CL4NX - Page 578

578
Operation 47: RFID Write with Cutter Mode and Backfeed After Printing (Tag Offset =
0) (CL4NX only)
When the cutter mode with backfeed after printing is selected, the label backfeeds after the cut and
stops at the print head position.
*1 The EPC code write <IP0> and RFID write <RK> commands write the data at this tag position.
The EPC code read, RFID read [DC2]PJ, UID/EPC/IDm print <TU>, and UID/EPC/IDm return <RU>
commands acquire the information at this tag position.