SATO CL608 - Page 130

PN 9001024
Rev. B Jan. 2000
Page 6-33
SATO CL608 & CL612 SERVICE MANUAL
SECTION 6 – Replacement Procedures
Fig. 6-70
BOTTOM HALF NOTCH/GAP
AND EYE-MARK SENSORS
Fig. 6-69
PAPER END SWITCH
REMOVE (2)
SCREWS
NOTCH/GAP
SENSOR
(BOTTOM
HALF)
REMOVE (2)
SCREWS
Fig. 6-71
PAPER END-SWITCH
(MICRO-SWITCH)
6-11 Replacing the Paper End Switch (Micro-Switch) and the
Bottom Half of the Notch/Gap and Eye-Mark Sensors